We want to do everything we can in order to ensure that our job is done correctly, and your utility might require you submit documentation showing how you have properly locked out tag out a circuit. While it is true that flipping a breaker switch is really all you need to do in order to lock out tag out a circuit, it is a very good idea to double check with your electrician or an electrical engineer to make sure. Step 6 – Double Check That The Circuit Is Locked
ELECTRICAL PANEL LOCK OUT TAG OUT HOW TO
The following section will outline how to work safely with a circuit breaker that has been locked out and tagged for service. The second step is to tag each of your locked-out circuit breakers with a Do Not Operate tag so that everyone knows not to touch or operate them during any point in time.Īfter both of your circuit breakers are locked and tagged, it is time to move on to safe work practices. This will ensure that no one can accidentally turn them back on while you are working on a project.
The first step is to lock out your circuit breakers by turning them clockwise until they are fully locked. Now that you have removed all of your circuit breaker’s protective covers, it is time to move on to locking out and tagging out your circuit breakers in preparation for service work. Step 5 – Lock The Circuit Breaker In The Off Position Always follow lock out tag out procedures when working on any electrical system. If you do not lock out and tag out correctly, there is a risk of electrical shock or electrocution.
ELECTRICAL PANEL LOCK OUT TAG OUT PROFESSIONAL
If you are not familiar with lock out tag out techniques, then it is best to contact an electrician or other qualified professional for assistance. Once you have removed all of these screws, you can pull off each cover and set it aside for later use. In most cases, there will be two to four screws on each cover. Using your screwdriver, remove each of the screws holding down each of your circuit breaker’s protective covers. Make sure to use lock out tag out kits so you can stay safe while doing maintenance work. This will minimize any chance of electric shock while isolating an area that you are working on. If possible, turn off multiple circuits at once. Use a lock out tag out kit and make sure that you do not leave your switch open, even for a second. This could be a sign, or something more obvious like putting a lock on your panelboard door.
You may also wish to put up a warning sign so other people know not to turn that circuit back on until you are done. If you do not know how to shut off power safely, then you should not be doing any lock out tag out procedures! If you are unsure how to do either of these things, ask someone who does know how before proceeding. This can be done by flipping a switch on your panelboard, or shutting off a main circuit breaker for your entire house if there is no panelboard. The first step in a lock out tag out procedure is to turn off power to that circuit or breaker.
But what does that mean? How do you Lock Out Tag Out a breaker? Don’t worry, we’ll tell you everything you need to know in this guide on how to lock out tag out a breaker safely and effectively. Lock Out Tag Out Breaker – When workers perform electrical work on equipment, they must make sure to Lock Out Tag Out the circuit being worked on so no one else can come in and inadvertently get hurt by an active circuit.
0 kommentar(er)
